Industrial vacuum / PFD-32

Central industrial vacuum

Distributed hose stations for collecting suitable settled dust and fines into a central separation and filtration system.

Process flow diagram

PFD-32 ORIGINAL DRAWINGEnlarge drawing ↗
PFD-32: original Ponka process flow diagram for Central industrial vacuum.
Ponka Engineering Alliance · Custom Air Systems Engineering (2018) Full sheet, p. 34 ↗

Reading the drawing

Three valved hose stations feed a common pipe that also has an air intake on the left. The arrows lead through an isolation flap and the exhaust fan, then into the cyclone. Separated solids leave at the bottom and air leaves at the top. The drawing ends there; final dust filtration discussed for a mining application is an additional stage.

Mining applications

Collecting settled dust and fines

Spilled fines and dust can accumulate around mineral handling equipment and on accessible surfaces. A central vacuum network brings collection points closer to housekeeping tasks. A mining arrangement must address the actual material and include suitable final filtration beyond the cyclone illustrated in the original brochure.

Housekeeping near conveyor transfer and screening equipment
Collection of suitable dry fines around enclosed handling areas
Maintenance cleanup at assessed mineral-processing workstations
Typical operating steps for this application
  1. Collect at the hose station

    An operator connects a suitable hose and tool at an available station to collect material from a surface.

  2. Convey to central separation

    The pipe network carries collected material to a separator selected for the solids and expected loading.

  3. Filter the remaining dust

    A suitable final filtration stage captures particulate that passes through the initial separator.

  4. Manage solids and exhaust

    Collected material is discharged into a contained receiver. The vacuum source and air discharge arrangement are selected with the filtration train.

Main components

ComponentRole in the system
Hose stations and toolsProvide accessible pickup points for planned cleaning tasks.
Central pipingConnects stations to the collection equipment.
Primary separatorRemoves a portion of the collected solids before final filtration.
Final filtrationProvides the dust-specific filtration stage absent from the original PFD.
Vacuum sourceProvides the pressure difference needed across the complete system.

Linked components open the VentilationComponents.com supplier catalogue. Equipment selection forms part of the system engineering.

Before equipment selection

What to discuss with Ponka

  • Characterize particle size, toxicity, abrasiveness, moisture, and combustible-dust potential.
  • Establish hose reach, simultaneous users, pickup duty, and access for emptying receivers.
  • Specify final filtration, containment, air discharge, and any required explosion protection for the material.

Central industrial vacuum · PFD-32

Open image at full resolution ↗Enlarged original PFD-32 process flow diagram

Discuss this system with Ponka

Tell us about the material, operating conditions and problem you need to address.

Discuss your project