System library
Search by system, process or building use.
25 systems
Local exhaust ventilation (LEV)
Capture dust, fume or vapour where a task releases it, before it spreads through the work area.
General industrial ventilation
Supply outdoor air and exhaust indoor air to manage heat and air movement across a production space.
Baghouse dust collection
Capture dust at crushing, screening and transfer points, then separate it from the extracted air using fabric filtration.
Cyclone and baghouse collection
Separate a coarse fraction before fabric filtration when the dust stream and operating duty justify two collection stages.
Venturi scrubber system
Bring particulate-laden process exhaust into contact with water, then separate the resulting droplets from the airstream.
Venturi scrubber with external reservoir
Combine venturi particulate collection with a separate water reservoir when the site layout calls for an external liquid-handling arrangement.
Tray wet scrubber system
Evaluate tray-based wet particulate collection with a recirculating reservoir, cleaning showers and a dedicated solids-removal arrangement.
Scrubbing-water circulation
Connect a wet collector to water recirculation, solids separation, make-up supply and a defined bleed-off route.
Steam-heated make-up air
Filtered, heated outdoor air to replace air removed by process exhaust and dust collection.
Industrial building HVAC
Outdoor air, filtration, heating, and cooling coordinated around the needs of a defined plant space.
HVAC with room pressurization
A dedicated filtered supply fan supports a defined room-pressure relationship alongside heating and cooling.
Electrical-room HVAC and filtration
Temperature control and filtered pressurization for electrical and control equipment rooms.
Central industrial vacuum
Distributed hose stations for collecting suitable settled dust and fines into a central separation and filtration system.
Pneumatic feed system
Introduce suitable dry powder or granular feed into a pressure conveying line through a controlled airlock feeder.
Solids conveying with cyclone separation
Assess an air-driven solids-transfer arrangement with a material-handling fan, cyclone receiver and controlled solids discharge.
Direct air-to-water heat recovery
Recover heat from a suitable exhaust stream into water where direct contact and a useful water-heating demand are compatible.
Indirect air-to-liquid heat recovery
Transfer exhaust heat through a heat exchanger into a separate liquid circuit for a suitable heating duty.
Dedicated outdoor air systems (DOAS)
A dedicated outdoor air system delivers conditioned ventilation air to occupied rooms while local equipment controls room temperature.
Heat recovery and energy recovery ventilation (HRV and ERV)
Heat recovery ventilation uses air leaving a building to temper incoming outdoor air. Energy recovery ventilation can also transfer moisture.
Packaged rooftop HVAC systems (RTUs)
A rooftop unit brings ventilation, heating and cooling to a building zone through a shared supply and return duct system.
Variable air volume systems (VAV)
A central air handler supplies several zones. Each zone adjusts the amount of conditioned air it receives as its heating or cooling needs change.
Hydronic fan-coil heating and cooling systems
Piping carries hot or chilled water to fan coils near the rooms they serve. Each fan coil uses that water to heat or cool room air.
Variable refrigerant flow systems (VRF)
A variable refrigerant flow system connects multiple indoor units to shared outdoor equipment. Each zone can adjust its heating or cooling output.
HVAC in a simple house
Follow the air through a Canadian detached house. A ducted heat pump keeps the rooms comfortable, while a heat recovery ventilator brings in outdoor air.
HVAC in a small commercial building
Follow the air through a single-storey office. One packaged rooftop unit heats, cools and ventilates the open workspace. A separate fan exhausts the washroom.
No matching systems
Ask Ponka for helpDiscuss your project with Ponka
Tell us about your facility, its operating conditions and the change you need.