Wet scrubbing / PFD-09

Tray wet scrubber system

Evaluate tray-based wet particulate collection with a recirculating reservoir, cleaning showers and a dedicated solids-removal arrangement.

Process flow diagram

PFD-09 ORIGINAL DRAWINGEnlarge drawing ↗
PFD-09: original Ponka process flow diagram for Tray wet scrubber system.
Ponka Engineering Alliance · Custom Air Systems Engineering (2018) Full sheet, p. 11 ↗

Reading the drawing

The fan pushes dry, dusty air into the scrubber below the tray. Air rises through the wetted tray and exits at the top, while water carrying collected solids drains to the classifier below. The inclined screw lifts solids into a hopper. Water from the classifier flows to the reservoir, where the pump draws it back to the tray.

Mining applications

Treating process exhaust

The brochure presents a NYE tray wet scrubber coupled to water circulation and a classifier. For a mineral-processing project, this arrangement is a starting point for assessing whether the particle characteristics and water-handling requirements suit a tray collector.

Dry mineral-dust exhaust being evaluated for wet collection.
Processes where captured solids can enter an engineered slurry route.
Facilities able to support scrubbing water, cleaning and solids removal.
Typical operating steps for this application
  1. Bring dust into the collector

    The exhaust fan shown upstream of the scrubber moves dusty process air into the collection vessel.

  2. Contact the scrubbing liquid

    The tray section provides the collection contact stage. Its suitability depends on the particle distribution, gas conditions and operating range.

  3. Maintain the water circuit

    The reservoir and recirculation pump supply water to the scrubber, with make-up and cleaning connections included in the arrangement.

  4. Remove collected solids

    The classifier and hopper provide a route for solids removal. The final separation, liquid return and disposal details follow the project material balance.

Main components

ComponentRole in the system
Tray scrubberProvide the wet particulate-contact section shown in the brochure.
Reservoir and recirculation pumpMaintain the scrubbing-water supply.
Classifier and hopperProvide the illustrated solids-separation and discharge route.
Exhaust fan ↗Establish airflow through the collection equipment.

Linked components open the VentilationComponents.com supplier catalogue. Equipment selection forms part of the system engineering.

Before equipment selection

What to discuss with Ponka

  • Particle wetting, settling behaviour and compatibility with tray collection.
  • Deposits, plugging, abrasion and access to the cleaning showers.
  • Liquid carryover control and the final exhaust arrangement.
  • Water treatment, solids handling, cleaning utilities and winter operation.

Related systems

Tray wet scrubber system · PFD-09

Open image at full resolution ↗Enlarged original PFD-09 process flow diagram

Discuss this system with Ponka

Tell us about the material, operating conditions and problem you need to address.

Discuss your project