Wet scrubbing / PFD-06

Venturi scrubber system

Bring particulate-laden process exhaust into contact with water, then separate the resulting droplets from the airstream.

Process flow diagram

PFD-06 ORIGINAL DRAWINGEnlarge drawing ↗
PFD-06: original Ponka process flow diagram for Venturi scrubber system.
Ponka Engineering Alliance · Custom Air Systems Engineering (2018) Full sheet, p. 8 ↗

Reading the drawing

Two exhaust branches join at the left and carry dusty air into the wetted venturi, where scrubbing water contacts the dust. The mixture enters a droplet separator: air leaves at the top and passes through the exhaust fan to atmosphere, while liquid collects below. The pump returns this liquid to the venturi; a bleed-off branch removes part of the circulating water, and make-up water enters the separator.

Mining applications

Treating process exhaust

A venturi scrubber is a candidate where wet particulate collection suits the mineral process. Selecting it involves the whole system: gas contact, droplet separation, fan duty, circulating water and a defined destination for the captured solids.

Mineral-processing exhaust where a wet collection route is appropriate.
Particulate streams whose properties are compatible with scrubbing water.
Process areas with suitable water supply and slurry-handling infrastructure.
Typical operating steps for this application
  1. Introduce the exhaust

    Ductwork brings the process airstream to the wetted venturi under controlled extraction.

  2. Contact dust with water

    Air accelerates through the venturi while introduced liquid disperses into droplets that contact the particles.

  3. Separate droplets

    A downstream droplet separator removes entrained liquid from the airstream before the exhaust fan and outlet.

  4. Circulate and manage water

    The pump returns water to the scrubber. Make-up and bleed-off connections support the selected water balance and solids-management arrangement.

Main components

ComponentRole in the system
Wetted venturi ↗Create contact between the process airstream and scrubbing liquid.
Droplet separator ↗Separate liquid carried out of the venturi.
Recirculation pump and sumpSupply liquid to the contact section and collect returning water.
Exhaust fan ↗Move the airstream through the scrubber and selected discharge.

Linked components open the VentilationComponents.com supplier catalogue. Equipment selection forms part of the system engineering.

Before equipment selection

What to discuss with Ponka

  • Dust properties, exhaust temperature and compatibility with water.
  • Required pressure drop, liquid flow and operating monitoring.
  • Erosion, corrosion, scaling and access for separator cleaning.
  • Bleed-off treatment, solids disposal and winter protection.

Related systems

Venturi scrubber system · PFD-06

Open image at full resolution ↗Enlarged original PFD-06 process flow diagram

Discuss this system with Ponka

Tell us about the material, operating conditions and problem you need to address.

Discuss your project