Industrial ventilation systems
Start with the point where dust, fumes or heat enter the air. Compare ways to capture the release, treat the exhaust and replace the air removed from the plant.
Browse by process
Workplace ventilation
Decide where to capture emissions or introduce replacement air in a work area.
-
Local exhaust ventilation (LEV)
Capture dust, fume or vapour where a task releases it, before it spreads through the work area.
-
General industrial ventilation
Supply outdoor air and exhaust indoor air to manage heat and air movement across a production space.
Dust collection
Follow dust from pickup points through separation, filtration and solids discharge.
-
Baghouse dust collection
Capture dust at crushing, screening and transfer points, then separate it from the extracted air using fabric filtration.
-
Cyclone and baghouse collection
Separate a coarse fraction before fabric filtration when the dust stream and operating duty justify two collection stages.
Wet scrubbing
Look at how exhaust contacts scrubbing liquid and how water and collected solids leave the circuit.
-
Venturi scrubber system
Bring particulate-laden process exhaust into contact with water, then separate the resulting droplets from the airstream.
-
Venturi scrubber with external reservoir
Combine venturi particulate collection with a separate water reservoir when the site layout calls for an external liquid-handling arrangement.
-
Tray wet scrubber system
Evaluate tray-based wet particulate collection with a recirculating reservoir, cleaning showers and a dedicated solids-removal arrangement.
-
Scrubbing-water circulation
Connect a wet collector to water recirculation, solids separation, make-up supply and a defined bleed-off route.
Ventilation & HVAC
Balance exhaust and supply, condition plant spaces and protect electrical or control rooms.
-
Steam-heated make-up air
Filtered, heated outdoor air to replace air removed by process exhaust and dust collection.
-
Industrial building HVAC
Outdoor air, filtration, heating, and cooling coordinated around the needs of a defined plant space.
-
HVAC with room pressurization
A dedicated filtered supply fan supports a defined room-pressure relationship alongside heating and cooling.
-
Electrical-room HVAC and filtration
Temperature control and filtered pressurization for electrical and control equipment rooms.
Heat recovery
Match a usable exhaust heat source with a process that can take the recovered heat.
-
Direct air-to-water heat recovery
Recover heat from a suitable exhaust stream into water where direct contact and a useful water-heating demand are compatible.
-
Indirect air-to-liquid heat recovery
Transfer exhaust heat through a heat exchanger into a separate liquid circuit for a suitable heating duty.
Industrial vacuum
Collect settled material from workstations or cleanup points through a central vacuum network.
-
Central industrial vacuum
Distributed hose stations for collecting suitable settled dust and fines into a central separation and filtration system.
Pneumatic conveying
Move suitable powders or process additives between a feed point and a receiver.
-
Pneumatic feed system
Introduce suitable dry powder or granular feed into a pressure conveying line through a controlled airlock feeder.
-
Solids conveying with cyclone separation
Assess an air-driven solids-transfer arrangement with a material-handling fan, cyclone receiver and controlled solids discharge.
Discuss an industrial ventilation project
Identify the process, the material being handled and where the dust or heat is released. A plant layout or process flow drawing can help define the scope.