Pneumatic conveying / PFD-27

Pneumatic feed system

Introduce suitable dry powder or granular feed into a pressure conveying line through a controlled airlock feeder.

Process flow diagram

PFD-27 ORIGINAL DRAWINGEnlarge drawing ↗
PFD-27: original Ponka process flow diagram for Pneumatic feed system.
Ponka Engineering Alliance · Custom Air Systems Engineering (2018) Full sheet, p. 29 ↗

Reading the drawing

Fresh air passes through the intake filters and into the pressure blower. Above the blower discharge, the screw conveyor delivers solids to a rotary airlock, which meters them into the moving air. The mixture travels past the spark detector and isolation flap to the receiving hopper at the right.

Mining applications

Moving bulk solids with air

A pneumatic feed system combines a controlled solids supply with a moving airstream. For mineral operations, its suitability begins with the material and route: particle size, density, moisture, abrasiveness and required throughput determine whether this approach is practical.

Suitable dry mineral powders transferred between enclosed equipment.
Compatible granular feed delivered to a downstream process receiver.
Dry process additives following confirmation of their conveying properties.
Typical operating steps for this application
  1. Prepare conveying air

    The pressure blower draws air through the intake filtration and supplies the conveying line.

  2. Meter the material

    A conveyor or feed hopper supplies a rotary airlock, which introduces material while limiting leakage across the pressure boundary.

  3. Transport the feed

    The airstream carries the selected material through the conveying route. Pipe layout and operating conditions are matched to its properties.

  4. Receive and separate

    The destination needs a receiver and an appropriate air-separation or filtration arrangement, developed with the upstream feed system.

Main components

ComponentRole in the system
Pressure blower and intake filtersSupply conveying air under the selected operating conditions.
Feed hopper or conveyorPresent material to the feeder at a controlled rate.
Rotary airlock feederIntroduce solids into the pressurised air circuit.
Conveying line and receiverTransport the material and separate it from the conveying air at its destination.

Linked components open the VentilationComponents.com supplier catalogue. Equipment selection forms part of the system engineering.

Before equipment selection

What to discuss with Ponka

  • Material testing, moisture sensitivity, particle damage and segregation.
  • Wear at bends, feeder clearances and access to clear blockages.
  • Route length, elevation changes, throughput and receiving-air filtration.
  • Material-specific fire, explosion, isolation and process-interlock requirements.

Related systems

Pneumatic feed system · PFD-27

Open image at full resolution ↗Enlarged original PFD-27 process flow diagram

Discuss this system with Ponka

Tell us about the material, operating conditions and problem you need to address.

Discuss your project