Local exhaust ventilation (LEV)

Capture dust, fume or vapour where a task releases it, before it spreads through the work area.

Where it fits

Start with the task. At a grinding wheel the release stays in one place. At a welding bench the operator and the plume can move. Those differences shape where a hood can go, what it must enclose and how the operator can reach the work.

  • A grinding or finishing station
  • A welding bench with changing work positions
  • A powder tipping or mixing point

How it works

  1. Capture the release

    An enclosure or hood draws air into the exhaust duct. Its position, the direction of the release and cross-drafts all affect capture.

  2. Carry and treat the exhaust

    The fan moves air through the duct and any air cleaner selected for the contaminant. The discharge location and replacement-air path are part of the design.

  3. Check capture during the task

    Observe the job with the operator in position. Commissioning measurements give maintenance staff a reference for checking later changes.

Planning a project

  • What is released, where does it travel and who works nearby?
  • How do the workpiece, doors or operator move during the task?
  • Which stations run together? Include photos or a layout with existing pickups and discharge points.

Related systems

Technical references

Discuss this system with Ponka

Tell us about the task, the operating schedule and the conditions at your site.

Discuss your project