Where it fits
Fan coils can give individual rooms their own temperature control where a building has a central supply of hot or chilled water. The piping arrangement matters on a spring day when sunny rooms need cooling and shaded rooms still need heat. An existing two-pipe loop and a four-pipe loop handle that situation differently.
- Hotels and similar buildings with many individually controlled rooms
- Office perimeter zones served by an existing heating and chilled-water plant
- Fan-coil replacements where pipe risers, drains and access panels will be reused
How it works
Distribute water from the plant
A conventional two-pipe changeover loop supplies hot or chilled water according to its current mode. A four-pipe system has separate hot-water and chilled-water circuits so different rooms can call for different modes.
Condition room air locally
A fan draws room air across the coil. The room controller adjusts the water valve or fan operation to meet the temperature setting. During cooling, a drain carries away moisture that condenses on the coil.
Deliver outdoor air
A common arrangement uses a separate outdoor-air system to supply the room or the fan-coil inlet. The air route and fan controls determine how ventilation reaches each occupied space.
Planning a project
- Identify the pipe arrangement, the heating and cooling plant, water temperatures if known and any seasonal changeover dates.
- Show the room layout, unit locations, service access, existing drains and the outdoor-air supply route.
- Tell us which rooms call for heat and cooling at the same time, and whether noise or access during occupancy limits the replacement options.